Cleanroom Tapes for Every Type of Application

Ultra processed and designed to limit particulate and bio-burden counts in cleanrooms and clean environments. Ideal for batching, color coding, packaging, etc. Matte finish can be written on with cleanroom pen and it has a clean peel from most surfaces.

Pre-cut, 18-inch, conformable LDPE tape strips are used to ensure an effective seal between the glove and garment in critical environments and quick release without damaging garments or gloves. Low-tack acrylic adhesive for easy garment release, gamma irradiated.

Perforated at 7.6 cm (3 inch) intervals, this conformable tape tears at the optimum length to secure glove to garment or to seal plates. Low-density, low-outgassing tape. Available gamma irradiated for aseptic environments. Suitable for pharmaceutical production.

A proven method of positively confirming completion of the sterilization cycle in both gravity discharge and vacuum autoclaves. Lead-free, saturated crepe paper with synthetic polyisoprene adhesive it has green indicator lines that change to black when sterilization is achieved Certifications: RoHS Compliant.

Low density polyethylene tape is low in halogens and leachable chlorides. Special construction lessens the chance of outgassing. This pressure sensitive tape has good chemical resistance and conformability.

Ultra processed and designed to limit particulate and bio-burden counts in cleanrooms and clean environments. Gamma irradiated for aseptic environments, it can be used for marking and labeling. Matte finish can be written on with cleanroom pen and it has a clean peel from most surfaces.

Designed applications: -100^°F to 500^°F (-70^°C to 260^°C). Ideal for heat-sealing, solder mask for circuit boards, flame-resistant electrical insulation, lamination, cold storage, lyophilization, and freeze drying.

Specially designed for sealing and packaging in ESD-sensitive environments, with non-hygroscopic properties, cellophane backing and a rubber based adhesive.

Heavy duty, antistatic tape with conductive grids embedded between two antistatic layers, for use on sensitive devices in ESD-sensitive environments. Protects sensitive devices that would be otherwise damaged by normal insulating tape.