Acetonitrile ≥99.9%, BAKER ANALYZED ULTRA LC/MS™ for LC-MS, tested for UHPLC, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
|
Danger
|
Synonyms:
Methane, cyano-
, Ethyl nitrile
, Methyl cyanide
, Ethanoic acid nitrile
, Methanecarbonitrile
, Ethanenitrile
, Cyanomethane
, ACN
Management of Change (MOC) category = N
BAKR9853-02
BAKR9853-02
JT9853-2CS
1501.01
USD
CAJT9853-2
JT9853-2
Acetonitrile ≥99.9%, BAKER ANALYZED ULTRA LC/MS™ for LC-MS, tested for UHPLC, J.T.Baker®
Acetonitrile
Formula:
H₃CCN MW: 41.05 g/mol Boiling Pt: 81.6 °C (1013 hPa) Melting Pt: –45.7 °C Density: 0.782 g/cm³ (20 °C) Flash Pt: 2 °C (closed cup) Storage Temperature: Ambient |
MDL Number:
MFCD00001878 CAS Number: 75-05-8 EINECS: 200-835-2 UN: 1648 ADR: 3,II REACH: 01-2119471307-38 Merck Index: 13,00071 |
Specification Test Results
For Laboratory,Research,or Manufacturing Use | |
Assay (CH₃CN) | ≥99.9 % |
Appearance | Passes Test |
Gradient Elution Test (a.u.) - 254 nm | ≤0.0005 |
Gradient Elution Test (a.u.) - 210 nm | ≤0.002 |
Fluorescence Trace Impurities, measured as Quinine Base - at 450 nm Emission | ≤0.3 ppb |
Fluorescence Trace Impurities, measured as Quinine Base - at Emission Maximum for Impurities | ≤1.0 ppb |
Color (APHA) | ≤10 |
Residue after Evaporation | ≤0.8 ppm |
Water (H₂O) | ≤100 ppm |
LC/MS Suitability - Largest Response on ESI- Positive Mode (as Reserpine) | ≤25.0 ppb |
LC/MS Suitability - Largest Response on ESI- Negative Mode (as 4-Nitrophenol) | ≤25.0 ppb |
Trace Impurities - Aluminum (Al) | ≤25.0 ppb |
Trace Impurities - Calcium (Ca) | ≤25.0 ppb |
Trace Impurities - Chromium (Cr) | ≤5.0 ppb |
Trace Impurities - Cobalt (Co) | ≤5.0 ppb |
Trace Impurities - Copper (Cu) | ≤5.0 ppb |
Trace Impurities - Iron (Fe) | ≤5.0 ppb |
Trace Impurities - Lead (Pb) | ≤5.0 ppb |
Trace Impurities - Lithium (Li) | ≤5.0 ppb |
Trace Impurities - Magnesium (Mg) | ≤10.0 ppb |
Trace Impurities - Manganese (Mn) | ≤5.0 ppb |
Trace Impurities - Nickel (Ni) | ≤5.0 ppb |
Trace Impurities - Potassium (K) | ≤10.0 ppb |
Trace Impurities - Sodium (Na) | ≤50.0 ppb |
Trace Impurities - Tin (Sn) | ≤5.0 ppb |
Trace Impurities - Zinc (Zn) | ≤10.0 ppb |
Filtered through a 0.1 micron filter. |
Learn more
About VWR
Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...