RapidVap® Vacuum Evaporation Systems, Labconco®

Supplier: Labconco
7913408 7927108 7487600 7486300 7491300 7485800 7491400 7496300 7496400 7486400 7900002 7900000 7909200 7927000 7900010 7900012
13500-058PK 1263.12 USD
13500-058 13500-060 13500-062 13500-064 13500-066 13500-068 13500-070 13500-072 13500-074 13500-078 26671-482 26676-000 26676-040 30181-434 37001-376 37001-380
RapidVap® Vacuum Evaporation Systems, Labconco®
Evaporators Centrifugal Evaporators
Systems combine vortex motion, heat, and vacuum to quickly evaporate solvents from multiple biological or analytical samples

Memory stores 1 to 9 programs. Microprocessor-controlled programming for vortex speed from 0 to 100%; heat from OFF to 100°C; time from 1 to 999 minutes; vacuum level from 0 to 999mBar. LCD for display of program number, actual and set point, vortex speeds, temperatures, time remaining, and point vacuum level. Control panel with run/stop button, preheat/end alarm button and indicator light, set point selection buttons, and increase/decrease programming buttons. Audible alarm for timed end point. Audible/visual alarm for endpoint detected by temperature sensors at heater and block.

Systems consist of a glacier white and charcoal epoxy-coated aluminum base with thermoplastic upper housing, a fluoropolymer resin-coated cast aluminum chamber and a 1.3cm (1/2") thick glass lid with safety switch/alarm. Models with lid heater are available for applications involving water or other high boiling point solvents. Lid heater increases visibility and eliminates fogging.

The microprocessor-controlled agitation at 1000rpm causes the liquid sample to form a vortex configuration that helps prevent bumping and greatly increases the surface area, enhancing evaporation. Rear-mounted vacuum port and electrical receptacle allow connection to a vacuum pump.

Certifications: The 115V units are ETL and ETL-C listed.

Ordering information: Vacuum pump hose and clamps are provided. The 115 V models include a 2m (6'6") three-wire cord and a 20A plug. Vacuum pumps, traps, and interchangeable fluoropolymer resin-coated aluminum blocks are sold separately. Contact your Avantor representative to select the appropriate vacuum pump and trap.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR