CellSTACK® Culture Chambers, Sterile, Corning®

Supplier: Corning
Corning®
3303 3312 3320 3330 3313 3321 3272 3311 3269 3270 3268 3271 3310 3319
89178-350CS 1310.95 USD
89178-350 33500-824 33500-822 33500-818 66025-628 66025-618 66025-622 66025-656 66025-624 22250-152 33500-820 66025-620 89089-960 16001-330
CellSTACK® Culture Chambers, Sterile, Corning®
Bioreactors
PS, sterile. The Corning® CellSTACK® culture chambers are available in five sizes and with three different surface treatments.

  • Two 26 mm diameter filling ports allow direct access to chamber bottom providing greater flexibility for sterile filling and emptying by pouring, pipetting or via tubing in a fully closed system
  • Standard 33 mm threaded caps have 0.2 μm pore non-wettable membranes sealed directly to the caps to allow gas exchange while minimising the risk of contamination
  • Optional 33 mm threaded caps are available with integrally sealed USP Class VI certified C-Flex® tubing to allow direct sterile transfer of media and cells via pumping or gravity feed
  • Polystyrene construction provides excellent optical clarity and mechanical strength

Other sterile 33mm threaded caps are also available: a solid unvented cap for closed systems or in applications where venting is not necessary; vented filling caps with integrally sealed USP Class VI certified 9.5mm (3/8") I.D. C-FLEX® tubing and fitted with a 50mm filter and 0.2µm pore membrane; vented filling caps with integrally sealed USP Class VI certified 6.4mm (1/4") I.D. tubing and fitted with a Air Vent Filter, for use when increased venting is required; and universal over caps for use with existing tubing systems. The stacking device (66025-658) models the top surface of the chamber, securely nesting in the strengthening ribs. It is used to optimize incubator space while providing clearance for venting. Chambers are manufactured under GMP conditions and 100% leak-tested prior to shipping. Certified nonpyrogenic and sterilized by gamma irradiation.

Corning® CellBIND® surface: The Corning® CellBIND® surface enhances cell attachment under difficult conditions, such as reduced-serum or serum-free medium, resulting in higher cell yields.
More consistent cell attachment resulting in increased cell growth
Adapts cells more quickly to reduced-serum or serum-free conditions
Reduces premature cell detachment from confluent cultures
May eliminate the need for tedious, time-consuming, low stability biological coatings
Requires no refrigeration or special handling and is stable at room temperature

Ultra-Low Attachment surface: The Ultra-Low Attachment surface is a covalently bonded hydrogel surface that is hydrophilic and neutrally charged. It minimises cell attachment, protein absorption and enzyme activation. The surface is non-cytotoxic, biologically inert and non-degradable.
Maintains cells in a suspended, unattached state
Prevents stem cells from attachment-mediated differentiation
Prevents anchorage-dependent cells from dividing
Reduces binding of attachment and serum proteins to the substrate

Chambers are sterilized by gamma radiation and certified nonpyrogenic. Manufactured under GMP conditions and 100% leak-tested prior to shipping.

Accessories information: A variety of optional filling caps are available to allow direct aseptic transfer of media and cells via pumping or gravity feed. Several coupling devices are available on these filling caps with or without integrally sealed USP Class VI certified C-Flex® tubing. Optional filling caps with attached filters with hydrophobic membranes provide for gas exchange and faster aseptic venting during liquid transfers. Extra sterile vented or unvented 33 mm replacement caps are also available. Reusable stacking devices fit between CellSTACK® chambers to keep them level and optimise incubator space while providing clearance for gas exchange.
All caps are 33 mm threaded caps.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR