Protector® Echo™ Filtered Fume Hoods with Side and Back Windows, Labconco Corporation

Supplier: Labconco
Protector®
182510400 182510801 182610801 182510401 182610420 182410400 182410801 182410402 182510802 182510420 182510220 182810421 182410200 182510200 182610821 182510601 182810402 182810602 182410201 182610220 182410800 182810800 182510202 182610800 182410600 182410220 182510821 182510402 182610602 182810820 182510820 182610401 182410602 182810620 182510800 182810801 182510602 182610621 182610202 182810600 182810802 182510201 182510221 182810220 182610820 182510421 182610421 182810201 182810202 182410421 182410401 182810221 182410802 182510600 182610200 182610601 182510620 182610221 182410221 182410620 182810420 182410820 182410601 182810401 182610402 182610201 182410202 182410621 182610620 182610802 182810601 182410420 182810400 182410821 182810821 182810621 182610400 182810200 182610600 182510621
76418-780EA 33782.75 USD
76418-780 76418-818 76418-816 76418-738 76418-814 76418-858 76418-736 76418-812 76418-856 76418-778 76418-734 76418-810 76418-854 76418-776 76418-732 76418-852 76418-774 76418-730 76418-850 76418-772 76418-770 76418-808 76418-806 76418-728 76418-804 76418-848 76418-726 76418-802 76418-846 76418-768 76418-800 76418-844 76418-766 76418-842 76418-764 76418-840 76418-884 76418-762 76418-882 76418-760 76418-880 76418-838 76418-836 76418-758 76418-878 76418-834 76418-756 76418-876 76418-832 76418-798 76418-754 76418-830 76418-874 76418-796 76418-752 76418-872 76418-750 76418-794 76418-870 76418-792 76418-790 76418-828 76418-826 76418-748 76418-824 76418-868 76418-746 76418-822 76418-866 76418-788 76418-744 76418-864 76418-820 76418-786 76418-742 76418-862 76418-740 76418-784 76418-860 76418-782
Protector® Echo™ Filtered Fume Hoods with Side and Back Windows, Labconco Corporation
Fume Hoods and Enclosures Ductless Fume Hoods
Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation.

  • Fully featured fume hood
  • Ducting is not required
  • Energy efficient
  • Environmentally friendly
  • Uses Erlab's Neutrodine Unisorb filtration
  • Four filter combinations available
  • Models with no windows or side windows are also available

The Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that do not require ducting for easy installation. The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the Eco-Foil™ Air Foil with Clean-Sweep openings, fiberglass-reinforced panel liner, fully closing sash, electrical receptacles and service fixtures.

The Neutrodine Unisorb Filter has been tested and found efficient on over 500 chemicals, and may last two years or more before requiring replacement. Because these filters allow the simultaneous handling of solvents, acids and bases, the Protector Echo may be used for a broad range of general chemistry fume hood applications. Plus, the use of these filters offers an eco-friendly solution to exhausting chemicals into the atmosphere. Options include acid or formaldehyde sensors or HEPA only for applications requiring particulate protection.

GFH Filtration Technology allows the Protector Echo Filtered Fume Hood to perform well beyond the SEFA 9-2010 DH III definition. User safety is maintained through numerous built-in features that constantly monitor and prevent unsafe conditions without relying on user practices or modifications. These safeguards include a sensor package that detects primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position and temperature, audio/visual alarms, and intelligent filter indication of type and status to prevent saturated filters being re-installed. The control box is conveniently located on the front of the hood and can be controlled by an app on the user’s phone.

Constructed with a glacier white powder-coated steel exterior and a chemical-resistant, fiberglass-reinforced, composite panel liner. The vertical-rising sash is a single piece of tempered safety glass with cable pulley and tracks with Clean-Sweep™ airflow openings. Sash stop is at 16" sash opening height. Sash opens to 28" high for loading. 37.5" (95.3 cm) high sightline from the work surface and header panel. Options include side and back windows for greater visibility and service fixtures.

Accessories information: Each hood requires a work surface, base cabinet or stand, and Neutrodine Unisorb Filters (sold separately). The number of filters needed depends on the hood's width. Optional accessories include HEPA Filter, prefilters, and Sash Opening Reduction Wing Kits.

Ordering information: The Protector Echo benchtop Filtered Fume Hood is available in three styles: no windows, side windows, and 360° windows, and four widths: 4', 5', 6', and 8'.

Caution: The Lifetime Payback Questionnaire (LPQ) form is required for all Protector Echo Filtered Fume Hood orders. It must be completed in full, submitted, reviewed, and approved before an order can be processed. Lead times do not start until the LPQ is approved. Contact your sales representative or Labconco for more information or a copy of the form.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR