Glass Vials, C&G Containers

Supplier: C&G Containers
LV64S103C53AZS LU29A000A01AZS LV69A000A01AZS LV64-M100-C52A LV64H100B51BZS LW74H120Z21AZS LY94-A020-A01A LY69-A000-A01A LV74H100B21BZS LT79-A000-A01A LU23A000A01FZS LU24A020A01AZS LU34A020A01AZS LV64H100B51AZS LT29-A000-A01A LX89-A000-A01A LW74-A020-A01A LV54D103C51AZS LY89A000A01AZS LV49-A000-A01A LV74-A020-A01A LY99A000A01AZS LU74-A020-A01A LX83A020A01AZS LAV040700005 LV74-M101-C52A LW59A000A01AZS LV74-M101-D12A LX94A020A01AZS LU79A000A01AZS LV54X120D41AZS LW49-A000-A01A LV44-A020-A01A LX69A000A01AZS LV79A000A01AZS LV59A000A01AZS LV74H100B51AZS LU39A000A01AZS LY83A020A01AZS LW54B120B51AZS LV64-M101-C52A LW54-A020-A01A LX99A000A01AZS LW74-N100-B51A LFV0403000 LW44-A020-A01A LT24A020A01AZS LY84-A020-A01A LW74A020A01CZS LW79-A000-A01A LV54S103C51AZS LV54A020A01AZS LV73A020A01AZS LX84-A020-A01A LV64A020A01AZS LW69A000A01AZS LX64-A020-A01A LV74A020A01CZS LW64-A020-A01A-ZM1 LY64-A020-A01A LT74-A020-A01A LV73A000A01BZS LT39A000A01AZS LW73A020A01AZS LT73A020A01AZS
10787-058CS 188.16 USD
10787-058 71001-262 10146-996 10146-998 71001-264 71001-266 71001-300 71001-268 71001-302 71001-260 71001-248 30617-868 30621-908 71001-326 10496-926 71001-328 10496-928 30621-904 30621-906 71001-252 71001-296 71001-330 71001-254 71001-298 71001-332 71001-256 71001-258 71001-290 71001-292 71001-250 71001-294 30621-912 30621-914 71001-314 71001-238 71001-316 30621-916 71001-318 30621-918 89137-128 71001-284 71001-240 71001-242 71001-320 71001-244 71001-288 10496-920 71001-322 71001-246 10496-922 71001-324 75840-124 89370-068 89136-722 89137-130 89137-132 89137-134 71001-304 71001-306 71001-276 71001-232 71001-310 71001-234 71001-312 71001-270
Glass Vials, C&G Containers
Vials
These glass vials from C&G Containers are designed primarily for the collection and testing of solid samples for Volatile Organic Analysis and Total Petroleum Hydrocarbons (TPH), and for the collection and testing of aqueous samples for Total Organic Carbon (TOC).

  • All glass vials are borosilicate Type 1 glass and use a 24-414 closure

Pre-cleaned and Certified products contain a Certificate of Analysis and Cleaning Protocol Form in the product case. Wash protocols for these vials include; A1 (Nitric acid wash) certified, B1 process certified, L3 (no wash, vial with cap attached) not certified, and D1 protocol, a depyrognation-like process for low level Total Organic Carbon (TOC), certified. Some vials are tare weighed. Some vials have dust covers.

A lot certificate of analysis is generated with the analytical results obtained, including the concentration reporting limits and units of measurement, for Pre-cleaned and Certified products. This certificate of analysis is included in each product case.

Caps can be either one-piece Open Top polypropylene with PTFE septa ultrasonically bonded (not glued), two-piece Open Top polypropylene with pressure fitted PTFE septa, solid top polypropylene cap with PTFE septa, or solid top polypropylene cap with PTFE liner. The PTFE septa is a 3.1 mm fluoropolymer resin/silicone septa laminate (overall thickness 0.125", ±0.006", silicone thickness 0.115", PTFE 0.010"). There is also a thin bonded PTFE Septa cap, overall thickness 0.060 ±0.005" (silicone: 0.056", PTFE: 0.004"). The PTFE liner is a 0.10" thick fluoropolymer disc.

Secondary uses include containment of extracts. Please refer to the applicable Certificate of Analysis for certified analytes and corresponding reporting limits.

Ordering information: Container measurements and capacity "contain" volumes may vary.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR