Print…

You Searched For: Specimen Mounting Supplies

Choose from a full array of products designed for insect specimen mounting, including spreading boards, mounting pins, mounting paper, pinning blocks, and holding fluids for preserving specimens without the use of formaldehyde. Complete mounting kits are also available for mounting and displaying insects. Labels and pins can be purchased independently to supplement larger packages, and pins have extremely sharp points and small heads to ensure precise pinning without tearing mounting specimens.

Choose from a full array of products designed for insect specimen mounting, including spreading boards, mounting pins, mounting paper, pinning blocks, and holding fluids for preserving specimens without the use of formaldehyde. Complete mounting kits are also available for mounting and displaying insects. Labels and pins can be purchased independently to supplement larger packages, and pins have extremely sharp points and small heads to ensure precise pinning without tearing mounting specimens.


169  results were found

Refine Results Sort by
SearchResultCount:"169"

Sort Results

List View Easy View

Rate These Search Results

Product Image-76948-748

Specimen Chucks for QS And Microm Cryostats, 30 mm

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-76948-822

Circular Specimen Chucks for SHANDON Cryostats, 30 mm, Available in Multiple Colors

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-76948-496

Circular Specimen Chucks for Leica, TBS, and Tanner Cryostats, 22 mm, Available in Multiple Colors

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-76948-736

Specimen Chucks for CRYOSTAR Cryostats, 40 mm, Available in Multiple Colors

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-76948-844

Circular Specimen Chucks For SHANDON Cryostats, 30 mm, Available In Multiple Colors

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-76948-578

Circular Specimen Chuck 30 mm Kit for Leica, TBS, And Tanner Cryostats

Catalog Number: (76948-578)
Supplier: Mortech Manufacturing
Description: SP103-KT: (2) 25 mm, (6) 30 mm, and (2) 40 mm in different colors, an angular brush, and a teasing needle.

New Product


Product Image-76948-526

Circular Specimen Chucks for Leica, TBS, and Tanner Cryostats, 25 mm, Available in Multiple Colors

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-76948-532

Circular Specimen Chucks For Leica, TBS, And Tanner Cryostats, 30 mm, Available In Multiple Colors

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-76948-764

Specimen Chucks for QS And Microm Cryostats, 40 mm, Available in Multiple Colors

Supplier: Mortech Manufacturing
Description: Available in multiple sizes and colors. Some variations also available in waffle pattern.

New Product

Product Image-100502-132

Specimen Mount Holders, Electron Microscopy Sciences

Supplier: Electron Microscopy Sciences
Description: Boxes in five configurations are available for storing SEM pin stub mounts and cylinder mounts.

Minority or Woman-Owned Business Enterprise

Product Image-470346-234

Insect Spreading Board

Catalog Number: (470346-234)
Supplier: ARCO
Description: Prepare your insects for mounting.
Vendor Image-103302-548

Thin Specimen Split Mount on Pin Stub, Electron Microscopy Sciences

Catalog Number: (103302-548)
Supplier: Electron Microscopy Sciences
Description: Thin specimen split mount on pin stub is used for cross section examination in scanning electron microscopes.
Product Image-76439-622

mPrep/s Specimen Processing Capsules, Electron Microscopy Sciences

Supplier: ELECTRON MICROSCOPY SCIENCE
Description: mPrep/s™ capsules allow users to fix, dehydrate and embed specimens in a single vessel. This capsule is highly recommended for transmission and scanni...

Product Image-102093-026

Goniometer Bases, Electron Microscopy Sciences

Supplier: Electron Microscopy Sciences
Description: Goniometer Bases tightly capture the MicroRT™ tubing to allow seamless room-temperature and low-temperature data collection. Available in several diff...

Product Image-102098-322

45° Multi Holder for 3 Pin Stubs, Electron Microscopy Sciences

Catalog Number: (102098-322)
Supplier: Electron Microscopy Sciences
Description: This 25.4 mm in diameter 45 Degree multi pin holder is designed to save time. It allows for a higher SE signal without having to tilt the specimen It ...
Product Image-102098-320

Multi Holder for 49 Pin Stubs, Electron Microscopy Sciences

Supplier: Electron Microscopy Sciences
Description: This 117 mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with 302 stainless steel springs that hold the pi...

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.

To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:

  • State issued document with your organization's Federal Tax ID Number
  • State issued document with your organization's Resale Tax ID Number
  • City or County issued Business License
  • State Department of Health Services License
  • Any other ID issued by the State that includes the business name & address

* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
65 - 80 of 169
no targeter for Bottom