You Searched For: Multi-Element Standards


475  results were found

SearchResultCount:"475"

Sort Results

List View Easy View

Rate These Search Results

Catalog Number: (SXCL-ICS-SET)
Supplier: SPEX CERTIPREP LLC
Description: Claritas PPT® multi-element standards for ICP-MS


Catalog Number: (SXICP-KIT-1)
Supplier: SPEX CERTIPREP LLC
Description: Assurance® Grade, set of 38 single-element standards


Catalog Number: (BT222060-500ML)
Supplier: BeanTown Chemical
Description: EC No: 231-714-2

SDS


Catalog Number: (BT145010-500ML)
Supplier: BeanTown Chemical
Description: Multi-Element Standard

SDS


Catalog Number: (BT121250-500ML)
Supplier: BeanTown Chemical
Description: Multi-Element Standard


Supplier: Thermo Scientific Chemicals
Description: Liquid
Catalog Number: (AA42885-AE)
Supplier: Thermo Scientific Chemicals
Description: Molecular Formula: Matrix: dilute HNO3
Physical Form: Liquid
UN No.: 3264
MDL No.: MFCD00212340

Catalog Number: (SXSPIKE-4)
Supplier: SPEX CERTIPREP LLC
Description: CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

CLP ISM 01.2 and ILM 05.2 & 05.3 Standards for ICP
Our spike standard, SPIKE-4, provides all of the analytes required for the IC, ICP-AES and the AA spike.


Catalog Number: (SXUSP-ORAL3-1)
Supplier: SPEX CERTIPREP LLC
Description: USP Standard.


Catalog Number: (SXUSP-INHL2B-2)
Supplier: SPEX CERTIPREP LLC
Description: USP Standard.


Supplier: SPEX CERTIPREP LLC
Description: CLP Standards for ICP & ICP-MS

Catalog Number: (SXINT-A2)
Supplier: SPEX CERTIPREP LLC
Description: CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

Alternate Standards
We also provide a solution of alternate interferents and alternate analysis. Alternate interferents A (INT-A2) and alternate analytes B (INT-B2) may be prepared in combination with the INT-A1 and INT-B3 solutions mentioned, or any combination involving the four solutions, depending on the analytes and interferents of interest to you. We provides ICP-MS interferents and interferent check solutions for SW-845.


Supplier: SPEX CERTIPREP LLC
Description: Claritas PPT® Multi-Element Standards for ICP-MS. Tuning solutions are for ICP-MS instrumentation tuning and mass calibration prior to analysis.

Catalog Number: (SXCL-CAL-1)
Supplier: SPEX CERTIPREP LLC
Description: Claritas PPT® Multi-Element Standards for ICP-MS. Tuning solutions are for ICP-MS instrumentation tuning and mass calibration prior to analysis.

Catalog Number: (SXCL-SPIKE-2)
Supplier: SPEX CERTIPREP LLC
Description: as PPT® multi-element spike standards for ICP-MS


Catalog Number: (SXCL-ICS-1)
Supplier: SPEX CERTIPREP LLC
Description: Claritas PPT® multi-element standards for ICP-MS


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.

To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:

  • State issued document with your organization's Federal Tax ID Number
  • State issued document with your organization's Resale Tax ID Number
  • City or County issued Business License
  • State Department of Health Services License
  • Any other ID issued by the State that includes the business name & address

* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
401 - 416 of 475
no targeter for Bottom