You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


545  results were found

Sort Results

List View Easy View
SearchResultCount:"545"
Description: Work Surface-LS,RS
Catalog Number: 10769-394
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surface
Catalog Number: 10769-396
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surface-RR
Catalog Number: 10769-398
Supplier: Labconco

Product available on GSA Advantage®


Description: Cupsink and Turret Kit
Catalog Number: 15202-652
Supplier: Labconco

Product available on GSA Advantage®


Description: Cupsink and Turret Kit
Catalog Number: 470203-214
Supplier: Labconco


Description: Work Surface
Catalog Number: 10018-928
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right side pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-928
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-940
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Pre-cut 6inx3in oval cupsink cutout optional
Catalog Number: 76045-936
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Pre-cut 6inx3in oval cupsink cutout optional
Catalog Number: 76045-924
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side/Right rear pre-cut 6inx3in oval cutouts
Catalog Number: 76045-932
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-942
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Pre-cut 6inx3in oval cupsink cutout optional
Catalog Number: 76045-934
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-930
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-926
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-938
Supplier: Labconco

Product available on GSA Advantage®


257 - 272 of 545